Rupture discs for cryostats, transport containers and storage of cryogenic gases or supercold liquids
Cryostats: Pressure protection of the inner and outer boiler / vessel
REMBE® rupture discs protect various cryostat and transport containers around the world from unacceptable overpressure and vacuum, caused by malfunctions, such as failure of the control valve, uncontrolled heat rise or vacuum collapse.
REMBE® rupture discs protect the following cryostats
- Bath cryostats
- Mixing cryostats
- Evaporation cryostats
With cooling media like
Transport and storage containers / tanks for cryogenic liquids and cryogenic gases are also protected worldwide against unacceptable overpressure and vacuum by REMBE® rupture discs.
REMBE® protected (cryogenic) containers can be found in research and development, the chemical and pharmaceutical industry, for the cooling of superconductors with helium in the medical technology field (MRI), in particle accelerators, simulation chambers, infrared sensors, liquefied petroleum gas containers, grinders, crushers and autoclaves in the aerospace industry.
Also: Undulators, generators for power plants and shipping, nuclear fusion technology, plasma research, mass spectrometers
The use of a REMBE® rupture discs guarantees you
- The Lowest leakage rates (min. <10^-7 mbar l/s), even at very low burst pressures
- Individual connections
- Absolute vacuum resistance, also with ultra-high vacuum
- Reliable pressure relief at the defined set burst pressure: No icing
- Rupture disc vs. safety valve - if you have to decide for a single facility
Depending on the cooling medium used, an icing of the valve is possible when a safety valve is used.
This means that opening at the previously defined burst pressure is no longer ensured. If the implementation of a safety valve is imperative due to the process, the safety valve should be protected by an upstream REMBE® rupture disc, or a secondary pressure relief (rupture disc) could be used.
Rupture discs and safety valves are frequently installed together on cryostats. It is possible that both safety devices can be used in parallel or in combination.